|
Audio-Technica U851RW
| Details |
U851RW
Cardioid Condenser Boundary Microphone
The white-finished version of the U851R, the phantom-powered U851RW features a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. Offering outstanding speech intelligibility and transparent sound quality for surface-mount applications, the U851RW accepts interchangeable condenser elements—available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851RW is equipped with self-contained electronics, eliminating the need for an external power module.
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
- PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Self-contained electronics eliminate need for external power module
- Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
- Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U851R) and white (U851RW)
SPECIFICATIONS | | |
| ELEMENT |
Fixed-charge back plate, permanently polarized condenser |
|
| POLAR PATTERN |
Half-cardioid
(cardioid in hemisphere above mounting surface) |
|
| FREQUENCY RESPONSE |
30-20,000 Hz |
|
| LOW FREQUENCY ROLL-OFF |
80 Hz, 18 dB/octave |
|
| OPEN CIRCUIT SENSITIVITY |
–34 dB (19.9 mV) re 1V at 1 Pa |
|
| IMPEDANCE |
200 ohms |
|
| MAXIMUM INPUT SOUND LEVEL |
134 dB SPL, 1 kHz at 1% T.H.D. |
|
| DYNAMIC RANGE (typical) |
108 dB, 1 kHz at Max SPL |
|
| SIGNAL-TO-NOISE RATIO |
68 dB, 1 kHz at 1 Pa |
|
| PHANTOM POWER REQUIREMENTS |
11-52V DC, 4 mA typical |
|
| SWITCH |
Flat, roll-off |
|
| WEIGHT |
9.2 oz (262 g) |
|
| DIMENSIONS |
4.25" (108.0 mm) long,
3.31" (84.0 mm) maximum width,
0.91" (23.0 mm) height |
|
| OUTPUT CONNECTOR |
TB3M-type |
|
| CABLE |
25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors |
|
| OPTIONAL INTERCHANGEABLE ELEMENTS |
UE-H hypercardioid (100°);
UE-O omnidirectional (360°) |
|
| ACCESSORY FURNISHED |
Soft protective pouch |
|
| |
|
|
|
List Price:
$250.00
$200.00
You Save: $50.00
| Warranty Information |
| multiconnects.com is an authorized dealer for all of the products we sell, therefore all manufacturers warranties are available when you buy through us. For specific warranty information on any product, feel free to call us at 314-968-9800. |
| Help & Support |
Why Buy |
Click Here for Live Help
Call an expert at 800.247.5440 |
Why buy from Multiconnects? |
|
Folks who bought this item were also interested in...
Click the item below for more information |
|
| * Excludes heavier and oversized items. Check your cart to make sure. Sales tax charged only in Missouri. |
|
|
Boundary Microphones 
