|
 Crown XLS 602D
Crown XLS 602D
|
List Price:
$742.00
$499.00
You Save: $243.00
|
Details
|
|
The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features. The four models in the series are the XLS-202, XLS-402, XLS-602, and XLS-802. They are identical except for output power and weight. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsreliably and within budget. Plus, every XLS Series amplifier is backed by Crowns unequaled Three-Year, No-Fault, Fully-Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value! Features: - Reliable design incorporates many popular features
- Housed in a rugged, all-steel 2U chassis
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Specifications: - Power Output (1 kHz):
- Stereo:
- XLS 802: 500W - 8 Ohm, 800W - 4 Ohm
- XLS 602: 380W - 8 Ohm, 600W - 4 Ohm
- XLS 402: 300W - 8 Ohm, 450W - 4 Ohm
- XLS 202: 200W - 8 Ohm, 300W - 4 Ohm
- Bridge-Mono:
- XLS 802: 1600W - 8 Ohm
- XLS 602: 1200W - 8 Ohm
- XLS 402: 900W - 8 Ohm
- XLS 202: 600W - 8 Oh
Performance: - Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V
- Frequency Response (at 1 watt): 22 Hz to 20 kHz: 0 dB, –0.8 dB
- Signal-to-Noise Ratio (20 Hz to 20 kHz):
- A-weighted, below rated power: >98 dB.
- No weighting, below rated power: >93 dB.
- Total Harmonic Distortion (THD): <0.5%.
- Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to –40 dB: < 0.3%.
- Damping Factor (8 ohm) 10 Hz to 400 Hz: >200.
- Crosstalk (below rated power) at 1 kHz: –76 dB. at 20 kHz: –58 dB.
- Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
- Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono.
- AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC
Controls: - Level: Two front-panel rotary level controls, one for each channel.
- Power: Front-panel switch; on when in the IN position.
- Circuit Breaker: Back-panel breaker provides overload protection.
- Mode Switch: Back-panel switch selects Dual or Bridge-Mono mode.
Indicators:- Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the channel’s input signal exceeds –40 dBu
- Clip Indicators: Two red LEDs, one for each channel, illuminate when the channel’s output is being overdriven
- Power Indicator: Blue LED indicates amplifier has been turned on and AC power is available
- Fault Indicator: Two red LEDs illuminate when amplifier is in protect mode. Also illuminates briefly during normal power-up when amplifier is first switched on
Input/Output: - Input Connectors: One per channel; back-panel three-pin female XLR input connectors.
- Output Connectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-pole Speakon connectors. The top Speakon connector is wired for both channels so it can be used for bridge-mono wiring or for stereo wiring of two speakers to a single Speakon connector. One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs)
Protection: - XLS Series amplifiers provide extensive protection and diagnostic capabilities, including output current limiting, DC protection, circuit breaker, and thermal protection
Construction: - Ventilation: Flow-through ventilation from front to back
- Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
- Air Volume Requirements (per minute per unit): 80.15 ft (2.27 m)
- Dimensions: EIA Standard 19-inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-inch (8.9-cm) height and 15.2-inch (38.6-cm) depth
- Weight:
- Net Weight:
- XLS-202: 23.0 lb (10.4 kg)
- XLS-402: 25.7 lb (11.7 kg)
- XLS-602: 29.0 lb (13.2 kg)
- XLS-802: 35.5 lb (16.1 kg)
- Shipping Weight:
- XLS-202: 28.0 lb (12.7 kg)
- XLS-402: 30.7 lb (13.9 kg)
- XLS-602: 34.0 lb (15.4 kg)
- XLS-802: 40.5 lb (18.4 kg)
|
| Warranty Information |
| multiconnects.com is an authorized dealer for all of the products we sell, therefore all manufacturers warranties are available when you buy through us. For specific warranty information on any product, feel free to call us at 314-968-9800. |
| Help & Support |
Why Buy |
Click Here for Live Help
Call an expert at 800.247.5440 |
Why buy from Multiconnects? |
|
Folks who bought this item were also interested in...
Click the item below for more information |
Standard 2ft XLR Female to RCA Male Cable
List Price:
$21.25
$16.81
You Save: $4.44
|
Standard 3ft XLR Female to RCA Male Cable
List Price:
$21.50
$16.96
You Save: $4.54
|
Standard 5ft XLR Female to RCA Male Cable
List Price:
$22.00
$17.27
You Save: $4.73
|
Crown XLS 802D
List Price:
$975.00
$599.00
You Save: $376.00
|
|
|
|
