The 480M from dbx is a measurement microphone intended for large and small room calibration. The ultra wide frequency response of 9Hz to 27kHz is flat throughout the entire spectrum, and results in accurate room calibration using Smaart, MLSSA, SIMM and TEF based systems.

The small element yields an omni-directional pattern resulting in a wide pick up area at the front and sides of the microphone capsule.

Features

• Miniature Omni-directional Capsule
• The miniature element provides an accurate omni-directional pattern with an even coherent response at the direct and off-axis sections of the microphone capsule
• Wide Linear Frequency Response
• The wide, linear frequency response accurately captures audio signal and reproduces the slightest nuance with great detail
• Uncolored Response
• The uncolored, flat signal results in accurate room calibration for indoor and outdoor application

Transducer                        Condenser

Polar Pattern                      Omnidirectional

Frequency Response            5Hz to 30kHz, +1/-3dB

Dynamic Range (Typical)    Not specified by manufacturer

Signal-to-Noise Ratio            27dB SPL equivalent (A-weighted)

Maximum Input Sound Level    150dB

Power Requirements                +48V phantom, 10mA

Output Impedance                    600Ω

Output Connectors            XLR, intended to drive a balanced transformerless input, pin 2+

Pad                                    No

Low Frequency Roll-Off      No

Dimensions                        9" long (229 mm)

Weight                              0.5 lb (225 g)

Quantity: