Free Shipping!!!

The Easyflex® line of miniature gooseneck condenser microphones are the perfect choice to capture speech and vocals in environments where quality, value and budget are primary considerations. The gooseneck condenser microphones feature a cardioid polar pattern, and are available in four different models, dependent on height and mounting application.

Available in either 12" or 18" lengths, each charcoal gray microphone comes standard with a single flexible gooseneck section for ease in accurate positioning, as well as a matching slip-on foam windscreen. Choose a locking flange mount with an integrated preamplifier and XLR connector for easy permanent install. Or choose side-exit mounting with 10-foot cables, in-line preamplifiers and threaded mounting flanges - easily adaptable to a standard mic stand.

• EZG/12 - with 12 inch (30 cm) gooseneck, attached preamp with XLR, locking flange mount and windscreen
• EZG/18 - with 18 inch (45 cm) gooseneck, attached preamp with XLR, locking flange mount and windscreen
• EZG/12SE - with 12 inch (45 cm) gooseneck, 10 foot side side-exit (or bottom exit) cable, in-line preamp with * XLR, threaded mounting flange, and windscreen E
• EZG/18SE - with 18 inch (45 cm) gooseneck, 10 foot side side-exit (or bottom exit) cable, in-line preamp with XLR, threaded mounting flange, and windscreen

Features:

• Single gooseneck section near microphone base for easy orientation of the microphone
• Tubular preamp body sized to fit many standard accessories
• Slide on windscreen
• (SE) 5/8–27 threaded nut with cable exit provides a variety of mounting possibilities
• EZG/18SE offers extended length for greater positioning range
• (SE) External preamp reduces visible size of the microphone

Specifications:

• Frequency Response: 50 to 17,000 Hz
• Polar Pattern: Cardioid
• Output Impedance (at 1 kHz): Rated at 150 ohms (180 ohms actual)
• Open Circuit Sensitivity (at 1 kHz, ref. 1 V/Pascal): -45.7 dB (5.19 mV)(1 Pascal = 94 dB SPL)
• Maximum SPL (1 kHz at 1% THD, 1 kilohm load): 129 dB
• Equivalent Output Noise (A-weighted): 29 dB SPL
• Signal to Noise Ratio (referenced to 94 dB SPL): 65 dB
• Dynamic Range (at 1 kilohm Load): 100 dB
• Common Mode Rejection: 45 dB minimum
• Preamplifier Output Clipping Level (1 kHz at 1% THD, 1 kilohm load): -12.0 dBV (0.25 V)
• Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
• Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
• Environmental Requirements: Operating Temperature Range: -18 degrees C to 57 degrees C (0 degrees F to 135 degrees F), Relative Humidity: 0 to 95%