CEP-6 is the cleanroom version based on the award winning design of the CP-series. When taking aesthetics into consideration, this may be your best option for a wall speaker in a clean room application, such as a laboratory or food processing facility.
Material/Colour
ABS / RAL 9010
Mounting
3 screws
Termination
Ceramic terminals
Weight
0.8 kg
IP-rating
0
Max. / min. amb. temp
90 °C / -20 °C
Rated / max. power
6 W / 10 W
SPL 1W/1m
88 db
SPL rated power
96 db
Effective freq. range
180 - 18000 Hz
Dispersion (-6dB) 1kHz / 4kHz
180° / 110°
Options
Impedance, color, label
Installation, Operation and Maintenance Procedures
Fitted with ceramic terminal block and thermal link.
To open the loudspeaker, press the two clips on each side of the loudspeaker and separate the cabinet from the chassis.
Fasten the chassis to the wall or roof with 3 screws.
Clip the cabinet on to the chassis after termination.
For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated.
Do not open loudspeaker when energized.
This loudspeaker is supplied with a 2 year warranty against defective workmanship.
Warranty Information
multiconnects.com is an authorized dealer for all of the products we sell, therefore all manufacturers warranties are available when you buy through us. For specific warranty information on any product, feel free to call us at 314-968-9800.
DNH CEP 6
