CEP-6 (T) is the cleanroom version based on the award winning design of the CP-series. When taking aesthetics into consideration, this may be your best option for a wall speaker in a clean room application, such as a laboratory or food processing facility.
50 V /100 V combined transformer:
(optional 70V)
Primary connection:
5 (White) : 6 (Green) 50V
5 (White) : 8 (Red) 100 V
Secondary nominal tappings:
1 : 4 6,0 W
1 : 3 3,0 W
2 : 4 2,0 W
1 : 2 1,5 W
3 : 4 0,9 W
2 : 3 0,5 W
| Material/Colour |
 |
ABS / RAL 9010 |
|
|
Termination |
|
Ceramic terminals |
|
|
Max. / min. amb. temp |
|
90 °C / -20 °C |
|
|
Rated / max. power |
|
6 W / 10 W |
|
|
Effective freq. range |
|
180 - 18000 Hz |
|
|
Dispersion (-6dB) 1kHz / 4kHz |
|
180° / 110° |
|
|
Options |
|
Impedance, color, label |
|
Installation, Operation and Maintenance Procedures
- Fitted with ceramic terminal block and thermal link.
- To open the loudspeaker, press the two clips on each side of the loudspeaker and separate the cabinet from the chassis.
- Fasten the chassis to the wall or roof with 3 screws.
- Clip the cabinet on to the chassis after termination.
- For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated.
- Do not open loudspeaker when energized.
- This loudspeaker is supplied with a 2 year warranty against defective workmanship.
DNH CEP 6T
