CM-6 EExmN(T) is based on our underwater speaker Aqua-30 and is airtight. The surface of the polyamide cabinet vibrates, thus doing the job of a diaphragm It comes with a non corrosive stainless steel bracket and 2 m cable tail. DNH is arguably the world leader in explosion proof loudspeakers, and this model is designed to withstand the extreme weahtercondition and the strict standards of the oil-rigs in the north sea. Weatherproof to IP-67.
Transformer: 100 Volt line (optional 70V, 50V)
Primary nominal tappings: 1 : 2 6,0 W 1 : 3 3,0 W 1 : 4 1,5 W
Material/Colour
Semiconductive polyamide / Black
Mounting
4 screws or bracket
Termination
Radox Cable, 1,5 m
Weight
(4,8 lb) 2,2 kg
IP-rating
((4X & 6)) 67
Max. / min. amb. temp
(104°F / -4°F) 40°C / -20°C
Rated / max. power
6 W
SPL 1W/1m
85 db
SPL rated power
93 db
Effective freq. range
500 - 10000 Hz
Dispersion (-6dB) 1kHz / 4kHz
180° / 130°
Options
Impedance, color, label
Use 4 screws for mounting on wall, alternative flush mounting.
When mounting with bracket, use the slit on each side to connect the bracket to the loudspeaker.
For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated.
CM-6 EExmN (T) is designed for Ex-clean room applications.
Special conditions for safe use: Resistance to impact 4 Joule
due to low risk of mechanical danger. The equipment is delivered with
the supply cable permanently connected to it. The free end needs to be
appropriately protected.
This loudspeaker is supplied with a 2 year warranty against defective workmanship.
Warranty Information
multiconnects.com is an authorized dealer for all of the products we sell, therefore all manufacturers warranties are available when you buy through us. For specific warranty information on any product, feel free to call us at 314-968-9800.
DNH CM 6 EExmNT
