DSP-15 EexeN is one of our most successful models due to it's durability, compact size and light weight paired with high sensitivity over a broad frequency range. It is made of anti-static polyamide and comes with a non-corrosive steel bracket. DNH is arguably the world leader in explosion proof loudspeakers, and this model is designed to withstand the extreme weather conditions and the strict standards of the oil-rigs in the north sea. Weatherproof to IP-67.
Material/Colour
Anti-static PA / Black
Mounting
Bracket or swivel bracket
Termination
e-chamber, loop in/out, screw terminals
Weight
2,2 kg
IP-rating
(4X & 6) 67
Max. / min. amb. temp
50°C / -50°C
Rated / max. power
20 W / 20 W
SPL 1W/1m
102 db
SPL rated power
113 db
Effective freq. range
500 - 6000 Hz
Dispersion (-6dB) 1kHz / 4kHz
105° / 35°
Options
Impedance, color, label
Installation, Operation and Maintenance Procedures
When mounting the loudspeaker please ensure that it
is re-assembled in the same manner in which it was received. Fasten
Bracket with 1-3 screws.
To change the position of the loudspeaker please
adjust the standard U- bracket (by loosening / tightening the screws)
as required.
DSP-15 EExeN/T can be supplied with 3 different bracket systems, according to customer requirements.
For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated.
Use only certified/specified cable glands and blanking plugs.
Do not open loudspeaker when energized.
Fasten lid with a torque of 2 - 3 Nm.
This loudspeaker is supplied with a 2 year warranty against defective workmanship.
Warranty Information
multiconnects.com is an authorized dealer for all of the products we sell, therefore all manufacturers warranties are available when you buy through us. For specific warranty information on any product, feel free to call us at 314-968-9800.
DNH DSP 15 EExeN 20 W
