VEP-15 (T) is small, but has a broad frequency range which enables it to project a very clear and audible voice.
Transformer:
Combined
50/100Volt line
White : Red 100 V
White : Green 50 V
Secondary nominal tappings:
C : 15 15,0 W
C : 10 10,0 W
C : 5 5,0 W
C : 1 1.0 W
| Material/Colour |
 |
ABS / V0 / RAL7035 |
|
|
Termination |
|
Internal screw terminals |
|
|
Max. / min. amb. temp |
|
90 °C / -40 °C |
|
|
Rated / max. power |
|
15 W / 20 W |
|
|
Effective freq. range |
|
150 - 20000 Hz |
|
|
Dispersion (-6dB) 1kHz / 4kHz |
|
|
|
|
Options |
|
Impedance, color, label |
|
Installation, Operation and Maintenance Procedures
- When mounting the loudspeaker please ensure that it is re-assembled in the same manner in which it was received.
- To open the loudspeaker turn the front gently counter clockwise and pull. To close the loudspeaker, align the two marks on the front and rear parts, and turn the front gently clockwise.
- For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated.
- Do not open loudspeaker when energized.
- This loudspeaker is supplied with a 2 year warranty against defective workmanship.
DNH VEP 15T
