PRO 47T
Cardioid Condenser Thread-mount Gooseneck Microphone

This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphone’s self-contained electronics eliminate need for external power modules. Available in two lengths: 12.40" (PRO 47T) and 15.79" (PRO 47TL).

• Wide-range condenser element with low-mass diaphragm for superior performance


• Self-contained electronics eliminate need for external power modules


• Flat, smooth frequency response


• Quiet, fixed-placement, long-life gooseneck


• Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud


• 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector


• Overall length of 12.40" (315.0 mm)


• Also available in a 15.79" (401.0 mm)-long version as PRO 47TL

SPECIFICATIONS
ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	70-16,000 Hz
OPEN CIRCUIT SENSITIVITY	-37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE	100 ohms
MAXIMUM INPUT SOUND LEVEL	134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	106 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	66 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	9-52V DC, 2 mA typical
WEIGHT	2.2 oz (63 g)
DIMENSIONS	12.40" (315.0 mm) long, 0.47" (12.0 mm) head diameter
OUTPUT CONNECTOR	3-pin XLRM-type on cable
CABLE	9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
ACCESSORIES FURNISHED	AT8146 windscreen; AT8425 5/8"-27 threaded mounting stud
AUDIO-TECHNICA CASE STYLE	M22