Free Shipping!!!

The new version of the 515 Series, the 515X Series provides overall improved performance and 6dB more output, and is ideal for a variety of sound reinforcement uses.

• 515BSM: Handheld, Cardioid Dynamic, Low Impedance, Push-to-Talk Switch, Attached Cable
• 515BSLX: Cardioid Dynamic, for Gooseneck Mounting, Low Impedance, Locking On/Off Slide Switch, Attached Cable, Gooseneck not Included
• 515SBGX: Cardioid Dynamic, for Gooseneck Mounting, Low Impedance, Push-to-Talk Switch, Attached Cable, without Gooseneck
• 515SBG-18X: Cardioid Dynamic, Low Impedance, Push-to-Talk Switch, with 18-inch (45 cm) Gooseneck and A13HD Mounting Flange
• 515SBG-18XF: Cardioid Dynamic, Low Impedance, Attached 18-inch (46 cm) Gooseneck, Push-to-Talk Switch, with A12 Flange
• 515SDX: Cardioid Dynamic, Handheld, High or Low Impedance (Plug Selectable), Locking On/Off Switch

Features:

• Rolled-off low-frequency response combined with a smooth high-frequency rise for clear and intelligible voice pickup
• Symmetrical cardiod pickup pattern minimizes feedback
• Neodymium magnet for high signal-to-noise ratio
• Heavy-duty zinc, die-cast, locking, metal grille protects cartridge and reduces wear
• Shock-mounted cartridge for quiet operation and low stand/handling noise
• Field serviceable and backed by the Shure 2 year warranty

515BSLG:

• Built-in slide switch controls both microphone circuit and relay or control circuit

515SDX:

• Lockable On/Off switch
• Dual impedance selectable by internal socket
• Slip-in swivel adapter for stand-mounted use
• Three-pin professional audio connector

515SBGX:

• Built-in push-to-talk button controls microphone circuit and relay or control circuit
• 4.75 cm (18 in.) gooseneck and mounting flange supplied (515SBG-18X and 515SBG-18XF only)

515BSM:

• Built-in push-to-talk button controls microphone circuit and relay or control circuit Built

515SBLX:

• Built-in slide switch controls both microphone circuit and relay or control circuit

Specifications:

515BSLG:

• Type: Dynamic (moving coil)
• Frequency Response: 80 to 15,000 Hz
• Polar Pattern: Cardioid (unidirectional). Effective rejection of sound at rear of microphone is uniform with frequency; front pickup characteristics are symmetrical about axis.
• Impedance: 150 ohms rated (180 ohms actual)
• Sensitivity (at 1,000 HZ): LO Z, Open Circuit Voltage-57.0 dBV/Pa (1.4 mV)(1 Pa = 94 dB SPL)
• Polarity: Positive pressure on diaphragm produces positive voltage on the RED lead with respect to the BLACK lead
• Switch: Built-in, double-pole double-throw slide switch. Lockplate to lock switch ON
• Shock Mount: Internal rubber vibration isolator
• Cable: 1.2 m (4 ft) extending from mounting flange, four conductors (two shielded), plastic jacketed and 4 pin female XLR connector.
• Case: Black finish die casting with black enamel diecast grille and stainless steel screen
• Net Weight: 515BSLG24F: 1008 grams (35.5 oz), 515BSLG27F: 1095 grams (38.5 oz)

515BSLX:

• Type: Dynamic (moving coil)
• Frequency Response: 80 to 15,000 Hz
• Polar Pattern: Cardioid (unidirectional). Effective rejection of sound at rear of microphone is uniform with frequency; front pickup characteristics are symmetrical about axis.
• Impedance: 150 ohms rated (180 ohms actual)
• Sensitivity (at 1,000 Hz): LOZ, Open Circuit Voltage: -57.0 dBV/Pa (1.4 mV)(1 Pa = 94 dB SPL)
• Polarity: Positive pressure on diaphragm produces positive voltage on the RED lead with respect to the BLACK lead
• Switch: Built-in, double-pole double-throw slide switch. Lockplate to lock switch ON
• Shock Mount: Internal rubber vibration isolator
• Cable: 1.8 m (6 ft) cable with effective hum shielding, four conductors(two shielded), plastic jacketed
• Case: Black finish die casting with black enamel diecast grille and stainless steel screen
• Net Weight: 315 grams (11.1 oz)

515BSM:

• Type: Dynamic (moving coil)
• Frequency Response: 80 to 15,000 Hz
• Polar Pattern: Cardioid (unidirectional). Effective rejection of sound at rear of microphone is uniform at all frequencies, while front pickup characteristics are uniform about axis
• Impedance: 150 ohms rated (180 ohms actual)
• Output Level (at 1,000 Hz): Open Circuit Voltage: ­57.0 dBV/Pa (0.14 mV)(1 Pa=94 dB SPL)
• Switch: Built-in, leaf-type, non-locking, push-to-talk
• Shock Mount: Internal rubber vibration isolator
• Cable: Highly durable, retractable cable with effective hum shielding, four conductors (two shielded), neoprene jacketed with 5-pin connector, Length: 330 mm (13 in.) retracted 1.83 m (6 ft) extended
• Case: Silver finish die casting with black enamel diecast grille and stainless steel screen

515SBGX

• Type: Dynamic (moving coil)
• Frequency Response: 80 to 15,000 Hz
• Polar Pattern: Cardioid (unidirectional). Effective rejection of sound at rear of microphone is uniform at all frequencies, while front pickup characteristics are uniform about axis.
• Impedance: 150 ohms rated (180 ohms actual)
• Output Level (at 1,000 Hz): Open Circuit Voltage: -57 dBV/Pa* (1.4 mV)(1 PA = 94 DB SPL)
• Phasing: Positive pressure on diaphragm produces positive voltage on RED cable relative to BLACK cable lead
• Switch: Built-in, leaf-type, non-locking, push-to-talk
• Shock Mount: Internal rubber vibration isolator
• Cable: Highly durable cable with effective hum shielding, four conductors (two shielded), plastic jacketed Model 515SBGX: 1.8 m (70 in.), Models 515SB-18X and 515SBG-18XF: 1.3 m (51 in.) from gooseneck
• Case: Silver finish die casting with black enamel diecast grille and stainless steel screen

515SDX

• Type: Dynamic
• Frequency Response: 80 to 15,000 Hz
• Polar Pattern: Cardioid (unidirectional)
• Impedance: LO Z: Microphone rating impedance is 150 ohms (270 ohms actual) for connection to inputs rated low impedance, HI Z: Microphone impedance is "High" for connections to high-impedance microphone inputs.
• Output Level (at 1,000 Hz): Open Circuit Voltage: 1 Pa = 94 dB SPL, LO Z: ­56.0 dBV/Pa (1.6 mV), HI Z: ­37.5 dBV/Pa (14 mV)
• Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 in both HI Z and LO Z modes
• Switch: Built-in ON/OFF switch, lockplate to lock switch ON
• Connector: Three-pin professional (male XLR) type
• Cartridge Shock Mount: Internal rubber vibration-isolator
• Swivel Adapter: Positive action, break-resistant, adjustable through 180 degrees, slip-out removal for handheld use, designed for mounting on stand with 5/8 in.­27 thread
• Case: Platinum beige enamel die casting with platinum beige die-cast grille and stainless steel screen
• Net Weight: 315 grams (11.1 oz)