Free Shipping!!!

It's hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in line or plate mount preamps, the Microflex Overhead condenser microphones capture Shure quality sound in a compact, adjustable package. Each model features one of the three interchangeable condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable. The preamp options available offer easy installation in ceilings or microphone stands, and when combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with a minimum of RF interference or electromagnetic hum. The new Microflex Overheads feature interchangeable cardioid, supercardioid and omnidirectional condenser cartridges that fit every model in the Microflex product line for enhanced convenience and consistent sound.

All Microflex microphones are available with any one of three interchangeable cartridges. The polar pattern of the cartridge is indicated by the model number suffix:

C = Cardioid, S = Supercardioid, O= Omnidirectional

• MX202B/C, S, O: Black mini-condenser microphone; includes cable, in-line preamplifier, and stand adapter
• MX202W/C, S, O: White mini-condenser microphone; includes cable, in-line preamplifier, and stand adapter
• MX202BP/C, S, O: Black mini-condenser microphone; includes cable and plate-mounted preamplifier
• MX202WP/C, S, O: White mini-condenser microphone; includes cable and plate-mounted preamplifier

Features:

• Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
• Interchangeable cartridges that provide an optimal polar pattern choice for each application
• Balanced, transformerless output for increased immunity to noise over long cable runs
• Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
• White or black finish that blends unobtrusively with most surroundings

Specifications:

• Frequency Response: 50 to 17,000 Hz
• Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
• Sensitivity (At 1,000 Hz, open circuit voltage): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV); All values -12 dB at 0 gain; 1 Pascal = 94 dB SPL
• Maximum SPL (1 kHz at 1% THD, 1 k ohm load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB; All values +6 dB at 0 gain
• Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
• Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
• Dynamic Range at 1 k ohm load: 96.2 dB, 100 dB at 0 gain
• Common Mode Rejection: 45.0 dB minimum
• Preamplifier Output Clipping Level (1% THD): -6.0 dBV (0.5 V), -12 dBV at 0 gain
• Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
• Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
• Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Relative Humidity: 0 to 95%